Gree 4LIV30HP230V1A Service Manual page 27

6. Function and Control
YAN1F6F(WiFi)
Buttons on remote controller
Introduction for icons on display screen
24
Introduction for buttons on remote controller
NOTE:
● This is a general use remote controller, it could be used for
the air conditioners with multifunction; For some function, which
the model doesn't have, if press the corresponding button on the
remote controller that the unit will keep the original running status.
● After putting through the power, the air conditioner will give out a
sound. Power indicator " " is ON. After that, you can operate the
air conditioner by using remote controller.
● Under on status, pressing the button on the remote controller,
the signal icon " " on the display of remote controller will blink
once and the air conditioner will give out a "di" sound, which
means the signal has been sent to the air conditioner.
● Under off status, set temperature and clock icon will be
displayed on the display of remote controller (If timer on, timer
off and light functions are set, the corresponding icons will be
displayed on the display of remote controller at the same time);
Under on status, the display will show the corresponding set
function icons.
button
Press this button to turn on the unit. Press this button again to turn
off the unit.
button
Press this button to select your required operation mode.
● When selecting auto mode, air conditioner will operate
automatically according to ex-factory setting. Under auto mode,
temperature can be displayed. Under auto mode, set temperature
can be adjusted . Press "FAN" button can adjust fan speed. Press
"SWING" button can adjust fan blowing angle.
● After selecting cool mode, air conditioner will operate under
cool mode. Cool indicator on indoor unit is ON(This indicator is
not available for some models). Press "▲" or "▼" button to adjust
set temperature. Press "FAN" button to adjust fan speed. Press
"SWING" button to adjust fan blowing angle.
● When selecting dry mode, the air conditioner operates at low
speed under dry mode. Dry indicator on indoor unit is ON(This
indicator is not available for some models). Under dry mode, fan
speed can' t be adjusted. Press "SWING" button to adjust fan
blowing angle.
● When selecting fan mode, the air conditioner will only blow
fan, no cooling and no heating. Press "FAN" button to adjust fan
speed. Press "SWING" button to adjust fan blowing angle.
● When selecting heat mode, the air conditioner operates under
heat mode. Heat indicator on indoor unit is ON (This indicator is
not available for some models). Press "▲" or "▼" button to adjust
set temperature. Press "FAN" button to adjust fan speed. Press
"SWING" button to adjust fan blowing angle.
Service Manual
Technical Information