Subscribe to Our Youtube Channel
Related Manuals for Powr-Flite PFX1082E
Summary of Contents for Powr-Flite PFX1082E
- Page 1 OPERATOR’S MANUAL Carpet Extractor PFX1082E WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT. © Tacony Corporation, All rights reserved PFX1082E-MAN 04/2021 Save These Instructions...
- Page 2 Congratulations on your purchase of a Midsize extractor. You are now equipped to handle any and all commercial carpet cleaning jobs. Your new unit is a high quality, precision-made product. All parts used in the manufacturing of this unit have passed rigid quality control standards prior to assembly.
- Page 3 This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk electric shock. This machine is equipped with a cord having an equipment -grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
-
Page 4: Maintenance
General Instructions for the Midsize Series Extractors Follow these easy step by step instructions to ensure proper operating performance. 1. Fill up the fresh water solution tank with tap water that is 120 F-135 F (49 C-57 C) and approved carpet cleaning chemical if you are not pre-spraying your chemical on the carpet. 2. -
Page 5: Safety Precautions
Safety Precautions These precautions are designed with the safety of the operator, the equipment, and others in mind and must be followed at all times to avoid serious personal harm and/or death, and damage to the unit. 1. Never use equipment near or around flammable or explosive materials, fuels, or solvents. 2. - Page 6 Troubleshooting Information ELECTRICAL SYSTEM PROBLEM POSSIBLE CAUSE SOLUTION No electrical power. 1. Defective power cord (s). 1. Replace. 2. Circuit breaker off or fuse 2. Turn circuit breaker on or blown. replace fuse. Unplug any equipment using the same circuit. Switch is turned on.
- Page 7 Foam/dirty solution coming 1. Foam bypassing water 1. Use additional defoamer. out of vacuum exhaust port. shutoff. 2. Elbow in vacuum tank is not 2. The elbow should be positioned correctly. pointed directly at the side wall of the tank away from the ball type shutoff.
- Page 8 For warranty information go to www.Powr-Flite.com A Tacony Company 3101 Wichita Court • Fort Worth, TX 76140-1755 1-800-880-2913 • Fax: 1-817-551-0719 PFX1082E-MAN 04/2021...
Need help?
Do you have a question about the PFX1082E and is the answer not in the manual?
Questions and answers