OPERATOR’S MANUAL & PARTS LIST OPERATOR’S MANUAL & PARTS LIST STANDARD AND HIGH SPEED FLOOR MACHINES Standard Speed, 175 RPM M201-3, M171-3, P131-3 Standard Speed Heavy Duty, 175 RPM M201HD-3, M171HD-3 Dual Speed, 175/320 RPM M202-3, M172-3 Sander, 175 RPM M171SD-3 U.S.
Page 2
Your new Powr-Flite Floor Machine will afford you many years of trouble-free operating satisfaction provided it is given proper care. Prior to packaging, your Powr-Flite Floor Machine was inspected by a Quality Control Technician. WARNING: To prevent injury, keep hands, feet and ORIGINAL INSTRUCTIONS APPROVED loose clothing away from the rotating pad.
Page 3
stripping applications. These heavy duty floor machines INSTRUCTIONS FOR SAFE OPERATION OF THE are specially recommended for long term aggressive MACHINE scrubbing and stripping maintenance. The M201HD-3 & Being mindful of the machine’s weight, first install the pad M171HD-3 heavy duty floor machines are specially driver and pad, brush or other attachments to be used.
Page 4
RPM MACHINES (MODELS M202-3 and M172-3) Replace the motor cover by setting it over the holes in The Powr-Flite dual speed machines will operate in a the housing and replace all of the screws. Check and broad range of applications. These machines perform maintain the tightness of all the fasteners.
Page 5
SAFETY INSTRUCTIONS TROUBLESHOOTING This Floor Machine should be grounded while in use to protect the operator from electric shock. This machine is Machine does not run. equipped with a 3-conductor cord and a 3-prong ground- The circuit breaker has tripped. Allow the circuit breaker ed type attachment cap plug to fit the proper grounding 2 minutes to cool before resetting.
Need help?
Do you have a question about the M201-3 and is the answer not in the manual?
Questions and answers