Powr-Flite PAS26R Operators Manual & Parts Lists
  1. Manuals
  2. Brands
  3. Powr-Flite Manuals
  4. Floor Machine
  5. PAS26R
  6. Operators manual & parts lists

Powr-Flite PAS26R Operators Manual & Parts Lists

Crossover automatic scrubber
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL & PARTS LIST
Crossover Automatic Scrubber
Model PAS26R
WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL
COMPLETELY BEFORE OPERATING THIS EQUIPMENT.
©
Tacony, Inc., All rights reserved

Save These Instructions

PAS26R 7/2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PAS26R and is the answer not in the manual?

Questions and answers

Related Manuals for Powr-Flite PAS26R

Summary of Contents for Powr-Flite PAS26R

  • Page 1: Save These Instructions

    OPERATOR’S MANUAL & PARTS LIST Crossover Automatic Scrubber Model PAS26R WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT. © Tacony, Inc., All rights reserved Save These Instructions PAS26R 7/2016...

  • Page 2: Table Of Contents

    PAS26R CROSSOVER AUTOMATIC SCRUBBER OPERATOR’S MANUAL TABLE OF CONTENTS PRESENTATION ......................4 MACHINE DESCRIPTION ....................5 TECHNICAL FEATURES ....................6 3.1. Unit functions ......................7 3.2. Unit specs ......................8 SAFETY FEATURES .......................9 4.1. Declaration of absence of harmful substances ..............10 4.2. Safety devices of fixed closing guards ................11 4.3.
  • Page 3 PAS26R CROSSOVER AUTOMATIC SCRUBBER OPERATOR’S MANUAL 14.3.5. Brush Pressure Indicator (5) ......................18 14.3.6. Travel Direction Selector (6) ......................18 14.3.7. Water-Detergent Solution Flow Control Knob (7) ................18 14.3.9. Battery Charge Status Indicator (9) ....................19 14.3.10. Hour Counter (10) ........................19 14.3.11. Acoustic Signal (11) ........................19 14.3.12.

  • Page 4: Presentation

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 1. PRESENTATION Dear Customer, Tacony Corporation would like to thank you for choosing to purchase this new ride-on automatic scrubber which thanks to its features - described in this manual - we are confident will satisfy your needs.

  • Page 5: Machine Description

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 2. MACHINE DESCRIPTION This automatic scrubber is driven by an operator seated on board, to wash and dry hard floors and is battery powered; intended for commercial use. The main components of the machine are as follows: •...

  • Page 6: Technical Features

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 3. TECHNICAL FEATURES 3.1 Unit functions...

  • Page 7: Unit Functions

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 3.2 Unit functions Manual squeegee lifting lever 12. Brush rotation motor Brake pedal 13. Brush head Anti-tip device 14. Squeegee assembly Motor/drive with electric brake 15. Vacuum motor Recovery tank discharge flexible hose 16. Battery compartment Recovery tank lid 17.

  • Page 8: Unit Specs

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 3.2 Specifications Features Technical Data Washing Function Washed lane width 25″ Solution tank 20 gal. Brushes motor .75 hp Brush rotation speed 180 RPM Weight on brushes 0-84 lbs. Brushes 2″ x 13″ Recovery Function Recovery tank 20 gal.

  • Page 9: Safety Features

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 4. SAFETY FEATURES WARNING To reduce the risk of fire, electrical shocks or personal injury, comply with the following instructions • Only use the machine indoors. Do not use the machine outdoors and do not expose it to rain.

  • Page 10: Declaration Of Absence Of Harmful Substances

    PAS26R CROSSOVER AUTOMATIC SCRUBBER WARNING • Disconnect the batteries before performing any kind of procedure on the machine. • Every procedure on the machine must be performed by skilled personnel only. Always wear protective clothing and glasses when operating on or near the batteries.

  • Page 11: Safety Devices Of Fixed Closing Guards

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 4.2. Safety devices of fixed closing guards The components protecting some areas that contain moving parts or live equipment are considered fixed closing guards. The brush plate is fitted with a fixed closing guard, consisting in the plastic material protection casing.

  • Page 12: Machine Transport And Lifting

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 6. MACHINE TRANSPORT AND LIFTING Lift the brush plate before proceeding with transport. Place the machine on a pallet, taking care to lock the wheels to prevent the machine from moving. Transport and any lifting must be done with the machine on a pallet. It is recommended to empty the solution recovery tanks.

  • Page 13: Installation

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 11. INSTALLATION 11.1 Preliminary operations The machine is shipped on a pallet. Unload the machine from the pallet. It is recommended not to push the machine from the pallet without the use of a ramp. It is recommended to remove the batteries (if installed) and unload it by hand.

  • Page 14: Machine Preparation And Commissioning

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 12. MACHINE PREPARATION AND COMMISSIONING 12.1. MACHINE START UP NOTE: Before operating the machine, perform preliminary inspection. FOR SAFETY Before starting the machine, ensure all safety devices work correctly. 1. The operator must be on the drive seat and keep his left foot on the brake pedal. To avoid any unintentional movement, the accelerator pedal must not be pressed.

  • Page 15: Use Of The Machine

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 13. USE OF THE MACHINE 13.1. FLOOR WASHING AND DRYING Plan the washing and drying route in advance. The longest route follows the perimeter of the area to be treated. The ideal route has the least turns, stops or brush plate lifting and lowering (to maneuver).

  • Page 16: Interruption Of Brush Motion And Washing

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 13.3. INTERRUPTION OF BRUSH MOTION AND WASHING 1. Press the switch that controls brush rotation on the control panel. The brush motor is de-activated. 2. Lifting one’s foot off the accelerator is also enough to stop brush rotation; the machine stops and the brushes stop.

  • Page 17: Emptying And Cleaning The Solution Tank

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 13.6. EMPTYING AND CLEANING THE SOLUTION TANK 1. Place the vehicle near a floor drain. The discharge pipe is in the left front corner of the machine, under the tank. 2. Turn the ignition key to “OFF”, the parking brake is engaged.

  • Page 18: Description Of Control

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 14.3. DISCRIPTION OF CONTROLS 14.3.1. ON/OFF KEY SWITCH (1) It controls electrical power supply to the machine’s functions. To switch on the machine, turn the key to the ON symbol. When it is switched on with the key, the machine’s electrical system is energized, the flashing light on and the possibility to lift and lower the brush plate.

  • Page 19: Battery Charge Status Indicator (9)

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 14.3.8. BATTERY CHARGE STATUS INDICATOR (8) The LED display signals the battery charge status. FOR SAFETY Do not charge the batteries before using the machine for at least 60 minutes, in order to not damage charging cycles.

  • Page 20: Squeegee Lift Lever

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 14.4.3. SQUEEGEE LIFT LEVER The brush plate is built into the squeegee and it lifts jointly with the brush plate. The squeegee may also be lifted independently by means of the manual lever located to the left of the steering column.

  • Page 21: Maintenance

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 14.5.2. BATTERY CHARGER SOCKET It is located directly on the steering column. When the machine is powered by its own batteries, the socket must be engaged. In the event of recharging the batteries, the top socket must be detached and the battery charger plug must be inserted into the lower socket.

  • Page 22: Charging The Batteries

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 15.2. CHARGING THE BATTERIES 1. Place the machine in a clean and well-ventilated area, near a battery charger. 2. Lift the upper tank to access the battery compartment. FOR SAFETY Before leaving the machine unattended or performing any maintenance operation, ensure it is on a flat surface, engage the parking brake, turn off the machine and remove the key.

  • Page 23: Brush Replacement

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 15.4. BRUSH REPLACEMENT This is done as follows: 1. With the brush plate lifted, turn the ignition key to OFF; the parking brake is engaged. 2. Press on the top of the brush to remove it from its rim hub and let it drop on the floor.

  • Page 24: Squeegee Drying Blade Replacement

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 15.7. SQUEEGEE DRYING BLADE REPLACEMENT Two blades are assembled: one on the front and one on the rear. They are built so as to avoid installation errors. The squeegee picks up the water from the floor through a vacuum chamber that generates inside it.

  • Page 25: Maintenance Schedule

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 15.10. MAINTENANCE SCHEDULE Maintenance Action Daily Every 50 Hours Every 200 Hours Check the battery water level when charged; if necessary, add distilled water (only for version with lead acid battery). Gel batteries are maintenance-free. Check seal of recovery tank cover.

  • Page 26: Troubleshooting

    PAS26R CROSSOVER AUTOMATIC SCRUBBER 15.12. TROUBLESHOOTING PROBLEM CAUSE SOLUTION Disconnected batteries Check connections of all battery cables. Corroded battery cables Clean connections. Unit not powering on Main thermal cut-out tripped Reset the thermal cut-out. Faulty key switch Replace the switch.
  • Page 28 A Tacony Company 3101 Wichita Court • Ft. Worth, TX 76140-1755 1-800-880-2913 • Fax: 1-817-551-0719 • www.Powr-Flite.com...

Table of Contents