Advertisement
Quick Links
INSTALLATION GUIDE
DESIGNER III SHOWER HEAD CHROME GREY DELUXE D3SHCGD
WHAT IS IN THE PACK
CLEANING THE SHOWER HEAD DESIGNER III SHOWER HEAD
Your Feltonmix shower head is manufactured
from self-cleaning plastic materials but if cleaning
is required use a combination of vinegar and
water and by following the steps below is usually
su cient.
1.
Remove shower rose from the shower
head stem.
2.
Place shower rose in a mixed solution of
vinegar and hot water for between
15 – 20 min. (Note: the face of the
shower rose cannot be removed for
cleaning purposes.)
If extra cleaning is still required use a soft brush.
Shower Head Stem
D3 Screw Cap
D3 Shower Head
Wall Flange
Female Threaded
Ball Joint Fitting
1.
1:1
Oxijet Water Saving Product
for Mains Pressure situation
2.
15 - 20 mins
Advertisement
Related Manuals for Felton DESIGNER III
Summary of Contents for Felton DESIGNER III
- Page 1 INSTALLATION GUIDE DESIGNER III SHOWER HEAD CHROME GREY DELUXE D3SHCGD WHAT IS IN THE PACK Wall Flange Shower Head Stem D3 Screw Cap Female Threaded Ball Joint Fitting Oxijet Water Saving Product for Mains Pressure situation D3 Shower Head CLEANING THE SHOWER HEAD DESIGNER III SHOWER HEAD...
- Page 2 Warranty, Maintenance and Care Felton Industries Limited guarantees these mixers to be free from defects in materials and workmanship for a period of five (5) years from the date of purchase. This warranty is e ective for 5 years from the date of purchase and covers supply of replacement parts only, not including installation. You must retain proof of purchase of the Mixer (such as an invoice or receipt) and provide this to Felton on request.