Advertisement
Steps 9-14 require one person to support the glass panel
9
at all times.
Use the suction glass lifters to gently lower the glass panel into the
floor profile, being careful not to knock it out of position. Check the
glass panel is level; pack it up with rubber strips if necessary, taking
note of their positions.
1Repeat step 10 with the other support arm. Double check the
1 1
levels with a spirit level across the wall.
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road,
Dunmow, CM6 1XJ
Drop one of the support arms into its boss. Using a spirit level,
10
hold the support arm level against the wall, and mark the centre
of the arm on the previously-drawn vertical line; the resulting
cross is the centre point of the support arm wall socket.
Remove the support arm.
Drill 7mm holes at the centre of the crosses marked on the
wall; insert Rawl plugs; tightly screw both support arm wall
12
sockets into place.
Telephone + 44 (0) 8448 001 500
Facsimile + 44 (0) 1279 635 074
info@majesticshowers.com www.majesticshowers.com
Advertisement
