Advertisement
( x mm)
Repeat step 4 for the other support arm, remembering to
5
measure each arm separately.
If you have to cut the support arms at different lengths, take
note of which side is which.
Repeat step 6 at the opposite end of the floor profile.
7
100mm
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road,
Dunmow, CM6 1XJ
Use a spirit level and setsquare to mark the wall perpendicular
6
to one end of the floor profile; measure inwards 100mm along
the wall and make another mark. Use a spirit level to draw a
vertical line up the wall from the second mark.
Cut the rubber strip to the length of the floor profile and insert
8
it. Fit the support arm bosses to the inside of the glass by
positioning them centrally to the pre-cut holes and tightening
Telephone + 44 (0) 8448 001 500
Facsimile + 44 (0) 1279 635 074
info@majesticshowers.com www.majesticshowers.com
100mm
Advertisement
