Sonoro PRIMUS SO-341 Safety Manual page 16

•
Installation location
Never use the device in areas with high levels of humidity. Protect it from heavy
•
soiling, e.g. splashes of grease and uncleaned extraction air in the kitchen.
Never place the device on or in the immediate vicinity of fire and heat sources, e.g.
burning candles, stove tops or radiators.
•
Installation surface
•
Place the device on a sturdy surface to prevent severe mechanical vibrations.
Do not place the device on surfaces into which it may sink, as this will obstruct the
ventilation openings. This prevents heat from building up inside the device.
•
Ventilation
Set up the device in such a way that adequate ventilation is ensured in order to
•
prevent heat form building up inside the device.
•
Always keep a minimum distance of 10 cm from other objects or walls.
The ventilation should not be imeded by covering the ventilation openings with
items, such as newspapers, table-cloth, curtains, etc.
•
3. Unpack device and start operation
The rubber feet of the device may produce stains on certain surfaces. Use a
•
suitable surface.
•
Do not use any media other than those specified in this manual.
Never use any power cables other than those supplied. Using the wrong power
•
supply will damage your device.
To maintain the compliance with the WiFi RF exposure requirement, place the
product at least 20 cm (8 inches) from nearby persons except when operating the
•
controls.
Do not touch or push the subwoofer on the bottom of the device. This can destroy
the loudspeaker.
16 © sonoro audio GmbH 2023