Multitech RouteFinder RF850 Quick Start Manual page 9

4. The Local Area Connection Properties
dialog box displays.
•
Select Internet Protocol [TCP/IP].
•
Click the Properties button.
6. Close out of the Control Panel.
7. Repeat these steps for each PC on your network.
To Set a Fixed IP Address
To set a Fixed IP Address, check Specify an IP address instead of Obtain an IP address automatically.
Then click OK.
1. Enter the workstation IP address as 192.168.2.x. Note that the x in the address stands for numbers
101 and up.
2. Enter the Subnet mask as 255.255.255.0
3. Enter the Default gateway as 192.168.2.1
4. Close out of the Control Panel.
5. Repeat these steps for each PC on your network.
Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L)
5. Once you click the Properties button, the following
screen displays. To have your DHCP client obtain a
dynamic IP address, click the button for Obtain an
IP address automatically.
Chapter 2 – Installation
9