Example 2 - Set Up Two Routefinders Behind A Nat Device - Multitech RouteFinder RF850 Quick Start Manual

Example 2 – Set Up Two RouteFinders Behind a NAT
Device
RouteFinder Setup – Side A
Step 1 – Networks & Services > Networks
1. Login to your RouteFinder and go to the Networks & Services > Network Configuration
screen.
2. Click the Add button to open the fields for entering the network information.
3. Create a new network name for the RF850-LAN by entering the Name, IP Address, and
Subnet Mask. For this example, enter the following:
Name: RF850-LAN
IP Address: 192.168.25.0
Subnet Mask: 255.255.255.0
4. Click the Add button to add the new network to the list.
5. Create a new network name for the RF850-WAN by entering the Name, IP Address, and
Subnet Mask. For this example, enter the following:
Name: RF850-LAN
IP Address: 65.126.90.248
Subnet Mask: 255.255.255.255
6. Click the Add button to add the new network to the list.
Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L)
Example 2 –Two RouteFinders Behind a NAT Device – Side A
Side A
Chapter 3 – Configuration Using Web Management Software
Side B
21