Chapter 4 - Configuration Examples; Example 1 - Setup Two Routefinders - Multitech RouteFinder RF850 Quick Start Manual

Chapter 4 – Configuration
These examples show how to configure the RouteFinder using the Web Management software program. The
Wizard Setup utility provides a basic firewall connection, while the Web Management software allows you to
configure VPN features, management features, and other options.
Example 1 – Setup Two RouteFinders
The example can be used for a LAN-to-LAN (branch office) setup. It requires two RouteFinders - one in the
home office and one in the remote branch office and requires additional parameters beyond the Wizard
Setup to be entered.
RouteFinder Setup – Side A
Step 1 – Networks & Services > Networks
1. Log in to your RouteFinder software and go to Networks & Services > Network Configuration
screen.
2. Click the Add button to open the fields for entering your network information.
3. Create a new network name for the Remote WAN by entering a Name, IP Address, and
Subnet Mask. For this example, enter the following:
Name: Remote-WAN
IP Address: 65.126.90.248
Subnet Mask: 255.255.255.255
4. Create a new network name for the Remote LAN by entering a Name, IP Address, and Subnet
Mask. For this example, enter the following:
Name: Remote-LAN
IP Address: 192.168.25.0
Subnet Mask: 255.255.255.0
5. Click Add to add the network to the list.
Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L)
Chapter 3 – Configuration Using Web Management Software
Examples
Side A Side B
15