The Wizard Setup Screen - Multitech RouteFinder RF850 Quick Start Manual
Internet security appliance
Hide thumbs
Also See for RouteFinder RF850:
- Brochure & specs (8 pages) ,
- Reference manual (18 pages) ,
- User manual (194 pages)
Table of Contents
Advertisement
Chapter 3 – Configuration Using Web Management Software
The Wizard Setup Screen
Click on the Wizard Setup button located under the Menu Bar. The Wizard Setup screen displays. The screen
establishes the firewall setup and can be used to enter initial data for other setups.
1.
Enter your Administrator Email Address (can be anything). Example:
2.
Enter your Hostname for the RouteFinder (can be anything).
Example: RouteFinder.domainname.com
3.
LAN IP Address and Subnet Mask default into the fields. These should be acceptable for your site.
4.
Enter the WAN IP Address. This is the PUBLIC STATIC IP address.
Set this option based on information provided by your ISP. Example: 204.26.122.103
5.
Change the Gateway IP address. This is the IP address of the router that connects to the Internet.
Example: 204.26.122.1
6.
Place a checkmark in the Packet Filter Rule LAN-ANY-ANY-ACCEPT box to enable the rule.
7.
Change Password Settings as appropriate for your network. It is highly recommended that you change
all default passwords. Do not leave them at the defaults for security reasons.
8.
Click Save to save the settings you just entered.
9.
The following message displays. Click OK to close the message box and save your changes.
Click OK to save the changes. Please be patient.
Setup will take a few minutes to implement the changes.
Do not close the Browser.
Click OK to close the message box and save your changes.
10.
One more message displays. Note that saving your settings will take 1-2 minutes.
Please do not close the browser. Server is saving the values.
After a few minutes you will be redirected to the new IP address.
If you are not redirected, change the address in the location bar
to 192.168.2.1.
11.
Test your workstation to see that it can access the Internet. If a connection is established, then the
settings have been entered correctly.
Your Basic Firewall Configuration Is Now Complete.
14
Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L)
admin@yourdomain.com
Advertisement
Table of Contents
