Multitech RouteFinder RF850 Quick Start Manual page 18

Chapter 3 – Configuration Using Web Management Software
RouteFinder Setup – Side B
Step 1 – Networks & Services > Network
1. Log in to your RouteFinder software and go to Networks & Services > Network Configuration
screen.
2. Click the Add button to open the fields for entering your network information.
3. Create a new network name for the Remote LAN by entering a Name, IP Address, and Subnet
Mask. For this example, enter the following:
Name: Remote-LAN
IP Address: 192.168.2.0
Subnet Mask: 255.255.255.0
4. Click Add to add the network to the list.
5. Create a new network name for the Remote WAN by entering a Name, IP Address, and
Subnet Mask. For this example, enter the following:
Name: Remote-WAN
IP Address: 65.126.90.250
Subnet Mask: 255.255.255.255
6. Click Add to add the network to the list
Note: The same address/mask pair should not be present in the current list displayed on the
screen.
18
Side A
Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L)
Example 1 –Two RouteFinders – Side B
Side B