ResMed Reslink Clinicians Manual page 5

ResMed produces a
specific information
SOFlWARE UPGRADE
Software upgrades can be performed via the SmartMedia card for
the flow generator. The upgraded
SmartMedia card.
The SmartMedia card that
an upgrade for AuTOSET
upgrades may be shipped
If the flow generator has not yet been
automatically conduct
software upgrade ensures
RESLINK. is recommended that you upgrade the flow generator
It
patients. This will
WARNING
Do not attempt to use the flow generator
Note: If your AutoSet Spirit or S7 Elite has software version SXI 16-0207 or less, you will
need to follow these steps to
• Download any summary data from the pow generator to AutoScan or ResScan via cable.
• Insert the SmartMedia card into the ResUnk..
•
Connect the ResUnk, power on
automatically.
•
Erase the summary data fr o m the AutoSet Spirit using the LCD, AutoScan or ResScan.
Management
Data
on the data obtained from the RESLINK.
version
is packed with the
SPIRIT'" or S7
separately.
upgrade when the SmartMedia card is
an
that the flow
approximately
take 20
upgrade:
the pow generator, and the upgrade will
Guide for all compatible flow
of the software is shown
RES LINK (not the
ELITE™ flow generators.
upgraded, the RES LINK will detect this and
generator is compatible for use
minutes.
for therapy during the
generators with
either RESLINK or
on the label of the
RES LINK) will contain
58
Other flow generator
inserted. The initial
first
with the
prior to issuing it to
upgrade.
start