Operation; Putting Into Operation; Operating The Machine; Check Charge State Of Rechargeable Battery - Wacker Neuson AS30e Operator's Manual

Operation

11.1 Putting into operation

11 Operation
11.1 Putting into operation
1
2
11.2

Operating the machine

11.3

Check charge state of rechargeable battery

42
1 Start button Actuation/deactivation
2
2 Control light Charge condition
3 Guide bracket
4 Start lever
ü Machine stands upright on suitable ground when starting.
3
1. Set the start lever 4 to the OFF position.
4
2. Hold the machine by the guide bracket 3.
3. Press start button activation/deactivation 1.
4. Check the current state of charge via the control light Charge state
2.
1 Start lever
2 Safety lever
5. Pull the safety lever 2 with one hand.
1
6. Slowly press the start lever 1 forward.
ð The machine starts up.
ð Vibration begins when moved forward.
• The operator's designated location is behind the machine.
• Guide and steer the machine using the guide bracket.
• Use the weight of the machine when working.
• Let the machine move forward on its own. Do not use your muscles
to push it forward or pull it back.
• For optimal control, performance and minimum hand and arm vibra-
tion, hold the guide bracket on the left and right.
• To avoid damage to the machine, do not move the machine when it is
running.
• Exercise caution with rough material. To avoid extreme wear and tear
to the ramming plate, ensure that it is always parallel to the ground
being compacted.
▪ Check charge condition of rechargeable battery on a regular basis.
Operator's manual | AS | 5100056974 | 06/2020 | [us]