Table of Contents
Advertisement
Attaching the Lens / Detaching the Lens (continued)
Detaching the Lens
(i)
(ii)
(i)
Lens
release
button
(i)
*1: Only when using a projector that has a projection lens cover. In addition, there are cases where
the attachment method or removal method of the projection lens cover differs from the procedure
(illustration) described above depending on the model being used. For details, see "Attaching/
removing the projection lens (optional)" in the operating instructions for the projector you are
using.
6-ENGLISH
(i)
Projection
lens cover
(i)
Orange color
(ii)
(iii)
The illustration for this procedure uses
PT-SDZ21K2C as an example.
1) Remove the projection lens cover.*
2) Remove the lens drop prevention
screw.
zRemove the first screw on the right
side of the projection lens mark (orange
color) using a Phillips screwdriver.
3) Turn the projection lens
counterclockwise while holding
down the lens release button to
take it off.
zTurn counterclockwise until the
projection lens mark (orange color) is
aligned with the mark on the projector
(O on left side of the LOCK).
4) Attach the projection lens cover.*
Attention
z Store the projection lens that was removed
while avoiding vibration and impact.
z Store the lens drop prevention screw that
was removed and do not lose it.
z Attach the supplied lens cover before
storing the lens.
1
1
Advertisement
Table of Contents
