Attaching The Lens - Panasonic ET-D75LE95C Operating Instructions Manual

Attaching the Lens / Detaching the Lens (continued)

Attaching the Lens

(i)
(ii)
(i)
(i)
Lens drop
prevention
screw
*1: Only when using a projector that has a projection lens cover. In addition, there are cases where
the attachment method or removal method of the projection lens cover differs from the procedure
(illustration) described above depending on the model being used. For details, see "Attaching/
removing the projection lens (optional)" in the operating instructions for the projector you are
using.
(i)
Projection
lens cover
(i)
Orange color
(ii)
The illustration for this procedure uses
PT-SDZ21K2C as an example.
1) Remove the projection lens cover.*
2) Align the mark on the projection
lens (orange color) with the mark
on the projector (O on the left
side of the LOCK) and insert; then
rotate in a clockwise direction
until it makes a "click" sound.
3) Secure the projection lens with
the lens drop prevention screw
included with the projector.
z Secure it in the screw hole (location
shown in the figure to the left) on the right
side of the projection lens mark (orange
color) using a Phillips screwdriver.
4) Attach the projection lens cover.*
Attention
z Gently turn the projection lens
counterclockwise to check that it will not
fall out.
1
1
ENGLISH-5