Operating Mode Description - Whirlpool FM07IDU32 Instructions For Use Manual

OPERATING MODE DESCRIPTION

Operation Modes:
I • Selecting mode
Each time MODE button is pressed, the operation
mode is changed in sequence:
COOLING---+ DRY---+ FAN ONLY---+ HEATING
Heating mode is not available for cooling only air
conditioners.
2. FAN mode
Each time the "FAN" button is pressed, the fan
speed is changed in sequence:
Auto ---+ High ---+ Medium ---+ Low
At "FAN ONLY" mode, only "High","Medium" and
"Low" are available.
At "DRY" mode, Fan speed is set at "Auto"
automatically, "FAN" button is ineffective in this
case.
l
3. Setting temperature
Press once to raise temperature setting by I
°
raise C
Press once to lower temperature setting by I
°
lower C
Range of available set temperature
*HEATING, COOLING
DRY
FAN ONLY
*Note: Heating mode is NOT available for
cooling only models.
4. Turning on
Press button, when the appliance receives
the signal, the RUNNING indicator of the indoor
unit lights up.
During mode changes wait a few seconds and
repeat the operation if the unit does not respond
at once.
When selection the heating operation, air flow will
start after 2-5 minutes.
° °
l8 C~32 C
°
+/-7 C
unable to set
51
-
In verter Plus
- -
-
* -
aa
I �; 88:88
t
---
Around U Dim
Timer On Timer Off Power
Clock
Save
Super Silent