Fixing The Osu-9600 Into The Rack; Connecting The Osu-9600 To The Otu-8000 - JDS Uniphase OTU-8000 User Manual

Chapter 3 Installation of the OTU-8000
OSU-9600 additional hardware
Fixing the OSU-9600 into the
Connecting the OSU-9600 to
the OTU-8000
OR
36
b Alternate position: the OSU-9600 is set further into the rack.
4 Fix the brackets with the screws already used by the 19'' brackets
and use thread lock if necessary.
Once the correct brackets are set onto the OSU-9600, you can install it
rack into the rack.
NOTE
Keep the screws and rings near the rack, for easier handling.
1 Set the OSU-9600 into the rack, at the height wished
2 While one person maintain the module in position, the other one
screws it onto the rack.
Connect the OTU-8000 to one of the OSU, using a command cable and
a power cable.
Connect this OSU-9600 with the second one using the appropriate
cords (delivered when 2 OSUs or more are ordered).
NOTE
The OSU-9600s may be mounted indifferently above or under the
OTU-8000 in a rack.
Connection to the OTU-8000
Fig. 36 2 OSU-9600 modules connected
User Manual
Command cable
Power cable
(long or short)
7OTU80010/06
Command cable
E98OSUXOSU
Power cable
E98OTUXOSU
Kit
Kit