Motorola DCT2000 User Manual page 11

INTRODUCTION
Item Description
RF IN A coaxial input that is connected to the TO RF IN, see Connecting the DCT 2000.
1
TO RF IN A coaxial input that directs the cable signal to other connections on the DCT 2000.
2
Removable plate This plate covers the location for an optional telephone module. Available if your service provider offers
3
telephone communication.
AUX AUDIO IN RCA audio inputs providing loop-through audio from auxiliary audio equipment.
4
5 SPDIF A SPDIF RCA connector that provides Dolby Digital
settings are defined in the electronic program guide.
6 S-VIDEO An S-Video connector sending high quality video to external devices (high-end VCR or TV) that accept S-Video.
7 Parallel port A serial data connector to interface external data devices such as a printer.
8 TO TV/VCR A coaxial output to connect the DCT 2000 to the TV or VCR.
9 CABLE IN A coaxial input for the incoming signal from the wall outlet.
10 AUDIO OUT Left/right RCA stereo outputs connect the DCT 2000 to your stereo.
®
audio or PCM audio (digital audio recording). The audio
7