Overview
Feature
Description
Reset Button
Resets your access point or resets the access point to the default
login settings.
If the access point experiences trouble connecting to the Internet,
briefly press and release the Reset button to reset the access point.
This retains the access point's configuration information.
To reset the access point to the factory defaults, press and hold the
Reset button for more than five seconds. This clears the access
point's Username, Password, IP Address, Subnet Mask and Operation
Mode. To re-configure the access point, see Section 3: Configuration.
Antenna
The antenna used for wireless connections. You are able to rotate and
tilt the antenna to gain the best signal reception.
Front of Access Point
The following illustration shows the WA840 front panel:
The access point LEDs indicate its operational status.
WA840
1
2
3
Section 1
1-9