Alliance Laundry Systems CP040PMN1 Manual
Alliance Laundry Systems CP040PMN1 Manual

Alliance Laundry Systems CP040PMN1 Manual

Washer-extractors
Hide thumbs Also See for CP040PMN1:

Advertisement

Quick Links

Washer-Extractors
Pocket Hardmount Variable-Speed
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Refer to Page 9 for Model Identification
1
2
3
PS40
4
5
6
7
8
9
0
www.comlaundry.com
PS40 Control
RUN
PROG
PHM1398C
PHM1398C
Part No. F8112301R1
December 2007

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CP040PMN1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Alliance Laundry Systems CP040PMN1

  • Page 1 Washer-Extractors Pocket Hardmount Variable-Speed PS40 Control Refer to Page 9 for Model Identification PROG PS40 PHM1398C PHM1398C Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Part No. F8112301R1 www.comlaundry.com December 2007...
  • Page 3: Table Of Contents

    All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. F8112301 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 4 Program 5 – Cold Gentle ..............42 Program 6 – Warm Gentle..............44 Program 7– Rubber Mats..............46 Program 8 – Soak.................. 48 Program 9 – Starch ................50 Program Worksheet ................52 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 5: Safety Information

    8. Do not reach into the washer if the wash drum is moving. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 6 19. Keep washer in good condition. Bumping or dropping the washer can damage safety features. If this occurs, have washer checked by a qualified service person. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 7: Safety Decals

    If questions regarding safety arise, contact the manufacturer immediately. Use manufacturer–authorized spare parts to avoid safety hazards. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 8: Operator Safety

    Operating the machine with severe out-of-balance loads could result Chemicals. Keep stainless steel surfaces free of ● in personal injury and serious equipment chemical residues. damage. SW039 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 9: Machine Location

    Always disconnect power and water supplies before a service technician performs any service procedure. Where applicable, steam and/or compressed air supplies should also be disconnected before service is performed. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 10: Directdrive

    Sufficient space to perform service procedures ● and routine preventive maintenance is especially important for machines equipped with AC inverter drive. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 11: Model Identification

    Model Number Prefix Brand Product Family; P=IPH Washer-Extractor Capacity (pounds dry weight of laundry) Type of Control; P=PS40 Spin Speed; M=Medium Electrical Voltage; Q=200-208/220-240 Volt/50 or 60 Hertz/3 Phase © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 12: Introduction

    Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance. Refer to Figure 1. PHM1397C PHM1397N Inside Door On Upper Rear Panel Figure 1 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 13: Control Identification

    Infra-Red Programming Port Start Button Enter Button Main Display Temperature/Toggle Button Program Number/Alarm Display Up Button Emergency Stop Button Down Button Run/Program Mode Key Switch Number Buttons Figure 2 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 14: Start-Up

    Press enter. Cannot be altered. Proceed to water inlet SE.i valve selection. Select all inlet valves that are equipped with machine, if desired. Press enter. Table 1 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 15 Input the number of seconds that you FL t 00 wish i9 to open after each chemical injection (15 seconds recommended). Press enter. Table 1 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 16 *C Celsius or Fahrenheit, press temperature temperature button to alter selection, button to alter selection, then press enter. then press enter. Table 1 (continued) Table 1 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 17 AG.Sn00.0 display, press temperature button to alter cylinder to stop before rotating in selection. opposite direction (3 seconds Table 1 (continued) recommended). Press enter. Table 1 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 18: Test Mode

    Use test 6 to check outputs. Follow test procedures input will change open and closed state to verify below. Watch for leaks from inlet valves, hoses and component operation. soapbox. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 19: Test 2: Analog Reference

    RPM and analog output will be displayed: such as H715u7.20. Press stop. Cylinder will slow to a stop and door will unlock. Press stop. Test 3: Not Available Proceed to Test 4. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 20: Test 6: Test Of Outputs

    Liquid supply number 1 output is open. out.So.1.0 Liquid supply number 2 output is open. out.So.2.0 Liquid supply number 3 output is open. out.So.3.0 Table 3 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 21: Programming

    Refer to Programming Mode section. NOTE: If Programming key is not turned to “Program” when this is attempted, “A0” will appear on display indicating that program mode has been locked out. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 22: Operating Mode

    Open door and rapid advance sequence. display will revert to “StArt”. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 23: Programmed Stop

    (pre-program) process. Refer to Setup Water level will be displayed while pressing these (Pre-Program) Mode section. buttons, so water can be drained back down to a desired level. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 24: Manual Heating

    Press stop to abort and start over. If “ProG” appears on display (flashing), you are in programming mode. NOTE: If programming key is not turned to “Program” when this is attempted, “A0” will flash on display. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 25 Input time of program step where program t 00.00 will stop until programmed temperature is reached (use “0” for beginning of program step). Press enter. Table 4 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 26 “no SoAP”) will be displayed. level selections, then press enter. Input number of seconds for this liquid t1. 000 Table 4 (continued) supply signal. Press enter. Table 4 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 27 Input number of minutes (up to 999) that StoP.000 program stops. Press enter. If “SiGnAL” was selected during setup (pre-program) process, “SiGnA000” will be displayed. Table 4 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 28 NOTE: All washer-extractors rotate counter (the last two zeros would be the next step clockwise in extract. number in the program) will be displayed. Table 4 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 29: Inserting/Deleting A Program Step

    ProG 00 modify. Press enter. Press . Program step number 4 has been deleted enter and program step number 5 has been moved into its Table 6 place. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 30: Copy Mode

    175 Pound Model – Press “586” enter to enter correct water level (586 mm). 12. Press stop to drain machine. 13. Press stop to exit test mode. 14. Procedure is complete. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 31: Ps40 Diagnostics

    Final extract was at a lower than programmed speed (fixed mount machines only). Load could not be balanced for a fixed speed spin. Final extract was skipped (free standing machines only). Table 10 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 32: Programming Tips

    “jolt” drain period instead of a final extract. Jolt routine alternates short spin and tumble segments and will effectively remove water from non-porous goods because they are continuously rearranged, freeing water trapped in pockets. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 33: Standard Programs

    Chem 2 Break 2 Sour / Softner Cup2 Chem 3 Starch Cup3 Chem 4 Cup4 Chem 5 Sour / Softner Cup5 Chem 6 Table 13 Table 15 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 34: Program 0 - Rinse And Spin

    Additional Stop Time Add Stop t Additional Soak Time Add SoaH t Spin Time Spin SP. T 5.00 Spin Type Smart Spin Speed GF Table 16 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 35 Table 16 (continued) Rinse and Spin Segment Drain drain Drain Movement drain Drain Time drain t Spin Delay Time Spin dEti td Total Time 8.05 Tumble Table 16 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 36: Program 1 - Cold Wash

    Cool Down To Cdu Add Cool CduI Lowest Cd Temp Add Cool Cdn Additional Stop Time Add Stop t Additional Soak Time Add SoaH t Table 17 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 37 Drain drain Drain Movement drain dist dist Drain Time drain t Spin Delay Time Spin dEti td Total Time 5.45 10.45 2.35 2.35 9.05 Tumble Table 17 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 38: Program 2 - Warm Wash

    Add StoP t Additional Soak Time Add SoAH t Spin Time SPin SP. T no spin no spin 5.00 Spin Type Smart Spin Speed GF Table 18 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 39 Segment Drain drain Drain Movement drain dist dist Drain Time drain Spin Delay Time Spin dEti td Total Time 5.45 10.45 2.35 2.35 9.05 Tumble Table 18 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 40: Program 3 - Hot Wash

    Add Stop t Additional Soak Time Add SoaH t Spin Time Spin SP. T no spin no spin 5.00 Spin Type Smart Spin Speed GF Table 19 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 41 Drain drain Drain Movement drain dist dist Drain Time drain t Spin Delay Time Spin dEti td Total Time 5.45 10.45 2.35 2.35 9.05 Tumble Table 19 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 42: Program 4 - Perm Press

    Add Stop t Additional Soak Time Add SoaH t Spin Time Spin SP. T no spin no spin 5.00 Spin Type Smart Spin Speed GF Table 20 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 43 Drain drain Drain Movement drain dist dist Drain Time drain t Spin Delay Time Spin dEti td Total Time 5.45 10.45 2.35 2.35 9.05 Tumble Table 20 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 44: Program 5 - Cold Gentle

    Additional Soak Time Add SoaH t Spin Time Spin SP. T no spin no spin no spin 0.30 5.00 Spin Type Spin Speed GF Table 21 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 45 Drain Movement drain dist dist dist Drain Time drain t Spin Delay Time Spin dEti td Total Time 3.45 8.45 2.45 2.35 9.05 Tumble Table 21 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 46: Program 6 - Warm Gentle

    Additional Soak Time Add SoaH t Spin Time Spin SP. T no spin no spin no spin 0.30 5.00 Spin Type Spin Speed GF Table 22 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 47 Drain Movement drain dist dist dist Drain Time drain t Spin Delay Time Spin dEti td Total Time 3.45 8.45 2.45 2.35 9.05 Tumble Table 22 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 48: Program 7- Rubber Mats

    Add SoaH t Spin Time Spin SP. T no spin no spin no spin no spin no spin 3.00 Spin Type Spin Speed GF Table 23 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 49 1 jolt jolt jolt Drain Time drain t Spin Delay Time Spin dEti td Total Time 5.30 10.30 2.30 3.00 7.00 3.50 Tumble Table 23 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 50: Program 8 - Soak

    Additional Soak Time Add SoaH t Spin Time Spin SP. T no spin no spin no spin 0.30 0.30 5.00 Spin Type Smart Spin Speed GF Table 24 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 51 Drain Movement drain dist dist dist Drain Time drain t Spin Delay Time Spin dEti td Total Time 5.45 605.45 10.45 2.35 2.35 9.05 Tumble Table 24 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 52: Program 9 - Starch

    Cool Down To Cdn Add Cool CdnI Lowest Cd Temp Add Cool Cdn Additional Stop Time Add Stop t Additional Soak Time Add SoaH t Table 25 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 53 Spin Type Smart Spin Speed GF Drain drain Drain Movement drain Drain Time drain t Spin Delay Time Spin dEti td Total Time 12.05 Tumble Table 25 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 54: Program Worksheet

    Add Cool Cdn Additional Stop Time Add Stop t Additional Soak Time Add SoaH t Spin Time Spin SP. T Spin Type Spin Speed GF Table 26 (continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...
  • Page 55 Rinse 1 Rinse 2 Spin Spin Segment Drain drain Drain Movement drain Drain Time drain t Spin Delay Time Spin dEti td Total Time Tumble Table 26 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8112301...

Table of Contents