Powering The Base Station And Phone Line Connection - Motorola md491 User Manual

Powering the Base Station and
Phone Line Connection
Important: Before installing or handling batteries,
please read the "Battery Safety Instructions" on
page 11.
The base station uses 4 AAA alkaline batteries for
optional backup power. To install the batteries:
1 With the bottom of the base station facing you,
press the cover latch with a screwdriver to lift and
remove the battery cover.
2 Insert 4 AAA alkaline batteries into the battery
compartment.
3 To replace the cover, insert the tabs of the cover
into the slots and press down until the cover
clicks into place.
4 Plug the power cord into the back of the base
station and into an outlet.
5 Plug one end of the telephone line cord into the
jack on the bottom of the base station.
16
Battery
compartment
(cover removed)