Powering The Base Station And Phone Line; Connection - Motorola MD490 Series User Manual

Powering the Base Station and
Phone Line Connection
Important: Before installing or handling batteries,
please read the Battery Safety Instructions on
page 8.
The base station uses 4 AAA alkaline batteries for
optional backup power. To install the batteries:
1. With the bottom of the base station facing you,
press the cover latch with a screwdriver to lift and
remove the battery cover.
2. Insert 4 AAA alkaline batteries into the battery
compartment.
3. To replace the cover, insert the tabs of the cover
into the slots and press down until the cover clicks
into place.
4. Plug the power cord into the back of the base
station and into an outlet.
5. Plug one end of the telephone line cord into the jack
on the bottom of the base station.
6. Plug the other end of the cord into the phone jack.
Battery
compartment
(cover removed)
13