Paslode Positive Placement F250S-PP Operating Manual And Schematic
  1. Manuals
  2. Brands
  3. Paslode Manuals
  4. Nail Gun
  5. F250S-PP
  6. Operating manual and schematic
Paslode Positive Placement F250S-PP Operating Manual And Schematic

Paslode Positive Placement F250S-PP Operating Manual And Schematic

Metal connector nailer
Hide thumbs Also See for Positive Placement F250S-PP:
Table of Contents

Advertisement

Quick Links

Download this manual
P
IMPORTANT!
DO NOT DESTROY
It is the customerʼs responsibility to have all
operators and service personnel read and
understand this manual.
PRINTED IN U.S.A.
© 2016, Illinois Tool Works Inc.
405673-9
07/16
Positive Placement
Metal Connector Nailer
MODEL F250S-PP
OPERATING MANUAL AND
SCHEMATIC
1
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Positive Placement F250S-PP and is the answer not in the manual?

Questions and answers

Related Manuals for Paslode Positive Placement F250S-PP

Summary of Contents for Paslode Positive Placement F250S-PP

  • Page 1 Positive Placement ® Metal Connector Nailer MODEL F250S-PP IMPORTANT! OPERATING MANUAL AND DO NOT DESTROY SCHEMATIC It is the customerʼs responsibility to have all operators and service personnel read and understand this manual. PRINTED IN U.S.A. © 2016, Illinois Tool Works Inc. 405673-9 07/16...

  • Page 2: Table Of Contents

    INTRODUCTION ® The PASLODE Positive Placement Metal Connector Nailer, Model F250S-PP is a ® quality-built tool designed for use in residential framing applications. This tool will deliver efficent, dependable performance when used according to the manufacturer’s guide- lines. Please study this manual, including the safety instructions, to fully understand the operation of this tool.

  • Page 3: Tool And Fastener Specifications

    TOOL AND FASTENER SPECIFICATIONS TOOL SPECIFICATIONS MODEL NO. F250S -PP ( Part# 500855 ) HEIGHT 13-7/8” WIDTH 5" LENGTH 19-1/2" WEIGHT 8.5 lbs. OPERATING PRESSURE 80 to 120 p.s.i. (5.5 to 8.3 bars) 30 Degree, Strip MAGAZINE TYPE FASTENER SPECIFICATIONS NAIL LENGTH 1-1/2”...

  • Page 4: Safety Instructions

    WARNING Failure to follow any of the above instructions could result in severe personal injury to tool user and bystanders or cause damage to tool and property. Contact your local Paslode Representative for a presentation of Paslode’s Safety Awareness Program.

  • Page 5: Tool Installation And Operation

    TOOL OPERATION Depth of Drive Adjustment (On tools equipped with this feature) Your Paslode tool comes ready for immediate use and can be installed by following these steps: 1. SAFETY - All tool operators and their immediate supervisors must become familiar with the operator This feature allows you to set the depth of the safety instructions before operating the tool.
  • Page 6 The tool is now ready to use. WARNING Use only fasteners that meet Paslode specifications. Use of fasteners that do not meet Paslode specifications can result in damage to the tool or injury to the operator or by standers.

  • Page 7: Air Systems

    Filter/Regulator/Lubricator Units Filter/regulator/lubricator units that can supply All pipes supplying air have a large enough enough air and protection for Paslode tools inside diameter to ensure adequate air supply. must meet the following specifications: The main supply pipe slopes down, away from Minimum 3/8 inch NPT port size .
  • Page 8 Use the air consumption chart in the Tool Schematic for eaxh tool when calculating the For example, given a 20 hp electric compressor operating requirements for the tools. Paslode supplying approximately 80 cfm of air at 120 psi tools are designed to operate efficiently...

  • Page 9: Features And Benefits

    S-PP FEATURES AND BENEFITS Adjustable Depth of Drive Ensures nail drives flush with hardware. Adjustable Nose Probe Exhaust Cap Locates hole and Deflects air away guides nail as it is from user. driven. Nail Lock Out Prevents blank firing. Overmolded Comfort Grip Ergonomic design provides greater comfort in all types of Sequential Trigger...

  • Page 10: Exploded View And Spare Parts List

    AIR PRESSURE-PSIG All parts must be periodically inspected and replaced if worn or broken. Failure to do this can affect the toolʼs Note: For optimum performance Paslode recommends operation and present a safety hazard. the use of a 3/8” Male fitting.
  • Page 11 Positive Placement ® S-PP Piston Assembly 500855 501468 Main Valve Assembly 500463 Magazine Assembly 500898 NOTE: Driver blade tip must be inspected periodocally for wear. Replace when worn. WORN Driver Blade Profile...

  • Page 12: Maintenance

    Ensure that the required safety information on the tool is legible. ❑ Reduce the regulated air pressure to 30 psi. ❑ Use only Paslode approved fasteners in the tool, and ❑ Remove all fasteners from the tool. ensure that they are correct for the application. ❑...

  • Page 13: Warranty

    Keep lubricator filled. Keep tool lubricated. Fill with Paslode pneumatic tool lubricant. Part No. 403720. Clean filter element-then blow Prevent clogging of filter with Wash with soap and water or air through filter in direction...

  • Page 14: Troubleshooting

    Make sure correct fasteners are being used. ® Use fasteners that meet Paslode specifications only. Increase air flow to tool -- use larger air lines (3/8 ID minimum). Adjust work contacting element where available.
  • Page 15 TOOL WARRANTY An Illinois Tool Works Company 155 Harlem Avenue Glenview, IL 60025 TOOL WARRANTY AND LIMITATIONS than...

  • Page 16: Accessories

    Ideal cleaner for all Paslode tools. Part No. 219348 Safety Glasses Clear Part No. 401382 For additional information on Paslode® products, visit our website at www.paslode.com. For technical support call 1-800-222-6990. To purchase parts and accessories, visit www.itwconstructionparts.com. An Illinois Tool Works Company...

Table of Contents