Ac/Dc Voltage Measurement; Ac/Dc Current Measurement - Fluke SMFT-1000 User Manual

SMFT-1000
Users Manual
10. Push  .

11. Push to hold the ac-L3 measurements.
The blue column header indicates that the ac-L3 measurements are on hold.
The display shows the Efficiency Factor ratio with a Pass or Fail icon.
12. Push 
A confirmation message with ID number shows on the display and then returns to the test
screen.

AC/DC Voltage Measurement

Single-shot voltage measurement that automatically detects ac or dc power.
To make a measurement:
1. Turn the rotary switch on the PV Analyzer to FUNC./P
2. Push  to measure the voltage.
The dashes on the display indicate that no leads are connected to the PV Analyzer.
3. Connect the test leads to the circuit under test.
Tip: Push
The PV Analyzer automatically detects if the measurement is ac or dc voltage.
4. Push  to hold the measurement.
The measurement is on hold.
5. Push 
A confirmation message with ID number shows on the display and then returns to the test
screen.

AC/DC Current Measurement

Single-shot current measurement that automatically detects ac or dc power.
To make a measurement:
1. Turn the rotary switch on the PV Analyzer to FUNC./P
2. Toggle 
The  button toggles the selection between a voltage or current measurement. The
dashes on the display indicate that no leads are connected to the PV Analyzer.
26
Find Quality Products Online at:
to save the results to memory.
 to see a connection diagram.
to save the results to memory.
to measure the current.
GlobalTestSupply
www.
.
AC/DC
.
AC/DC
.com
sales@GlobalTestSupply.com