Section 1 - Cnc Pendant Models (Hd4, Piranha Fx/Xl) - Next Wave Automation Digital Duplicator Manual

Section 1 – CNC Pendant Models (HD4, Piranha FX/XL)
Mounting the Digital duplicator in the router
 Insert and secure the duplicator into the ¼" collet
 Make sure the router is unplugged from power
Setting up the Digital Duplicator
 Open apps on the Pendant LCD
 Select "Digitizer"
 Press to open the digitizer setup menu
 Set your scan speed (the speed at which the digitizer will run)
 IMPORTANT: Make sure Scan Speed is set at 15
March 30, 2017 4 | P a g e