Cnc Shark Hd4 Operations Safety Instructions - Next Wave Automation CNC Shark HD4 Owner's Manual

CNC Shark HD4 Operations Safety Instructions

1.
Read and follow all safety and operating instructions before using the CNC Shark HD4. This includes
reading the manual for the router that will be mounted on your CNC Shark HD4. Take the time to
orient yourself to the Shark HD4 and the workflow steps.
2.
Take small steps early in use – this will enable you to use the Shark HD4 safely and effectively.
Practice each step a few times early on without running the router for example. Again, this
orientation process will help you to use the Shark HD4 safely and effectively.
3.
Let the machine and spindle come to a complete stop before touching parts, CNC Shark HD4, or
router. Ensure that you have a positive system in place to make sure that power is not applied to the
router or the CNC Shark HD4 while positioning a work piece, adjusting the position of the tool,
changing a bit, or setting up clamps, hold downs, or jigs.
4.
Ensure that the material or work piece is firmly secured to the table. This includes accounting for the
attachment and hold down of any pieces that will become cutouts or cutoffs during the machining
process. Also, be sure that all clamps, hold downs, and jigs are not in the path of the cutter and do
not interfere with the movement of the gantry.
5.
Always wear eye and ear protection while operating your CNC Shark HD4.
6.
Keep miscellaneous equipment off the CNC Shark HD4 table and gantry. This includes areas
alongside the table where the gantry travels.
7.
Never leave the CNC Shark HD4 unattended while it is running. A work piece slippage, unexpected
cutting error or other unexpected event might occur. This could result in injury as well as damage to
the CNC Shark HD4.
April 2018
Power Strip On/Off Switch
CNC Shark HD4 | 6