Next Wave Automation Digital Duplicator Manual page 9

 Make sure there is a flash drive connected to the LCD Pendant as the
digitizer will not work without it
o The flash drive will need to plugged into the LCD after power
has been established.
 Jog the digitizer until it is barely touching the bottom left corner of
the target item
 Zero all axis' (X,Y,Z)
 Select "Run Digitizer" on the Digitizer setup menu
Registering your Digital Duplicator
Before being able to use your scan file, you will need to register your

Digital Duplicator with the Control Panel. (Universal Control Panel or
Shark Control Panel 2.1)
Download the CNC Control Panel 3.0 or the Shark Control Panel

(included with your machine)
Connect the controller for your machine via USB cable to your

computer.
Power on the controller

Open the CNC CP v3.0 or the CNC Shark Control Panel

If you have already registered your CNC, the CNC product registration

will not automatically open. Simply go to Help>Register your Next
Wave Product and proceed with the registration form.
You will be asked to register your CNC and accessories.

 Select the CNC model you own
 Enter your Digital Duplicator serial number in one of the "Accessory
Serial #" slots
March 30, 2017 9 | P a g e