To Our Customers; Warranty - Next Wave Automation Digital Duplicator Manual

To Our Customers

Thank you for purchasing the CNC Digital Duplicator Accessory! CNC Digital Duplicator Accessory
brings enhanced CNC machining capabilities to your CNC system.
This manual tells you how to install and use your CNC Digital Duplicator Accessory. Please read the
manual carefully. The manual also includes our warranty and important safety information.
This manual has been written with the assumption that the owner is familiar with the basic
operation of a computer as well as the basic aspects of techniques for the safe operation of
woodworking power tools. Information in this manual is subject to change without notice.

Warranty

Next Wave Automation warrants to the original retail purchaser of a CNC Digital Duplicator
Accessory and purchased from an authorized CNC Shark distributor will be free from defects in
material and workmanship for ONE YEAR from the date of purchase. This warranty is for parts and
labor to correct the defect, and does not cover the cost of shipping the defective item(s) to Next
Wave Automation for repair.
This warranty does not apply to defects arising from normal wear and tear, misuse, abuse,
negligence, accidents, unauthorized repair or alteration, or lack of maintenance. This warranty is
void if the CNC Digital Duplicator Accessory is modified without the prior written permission of Next
Wave Automation, LLC, or if the CNC Digital Duplicator Accessory is located or has been used outside
the country of residence of the authorized CNC Shark distributor.
Please contact Next Wave Automation to take advantage of this warranty. If Next Wave Automation
determines the CNC Digital Duplicator Accessory is defective in material or workmanship, and not
due to normal wear and tear, misuse, abuse, negligence, accidents, unauthorized repair or
alteration, or lack of maintenance, then Next Wave Automation will, at its expense and upon proof
of purchase, send replacement parts to the original retail purchaser necessary to cure the defect.
PLEASE NOTE
The following Instruction Manual is broken into two distinct machine differences.
 Section 1 - Pendant models starting with Piranha Models, CNC Shark HD4
including the HD4 Extended
 Section 2 – Earlier CNC Shark non-pendant machines (must have one piece
controllers)
March 30, 2017 3 | P a g e