Next Wave Automation Digital Duplicator Manual page 14

After you have it in position press the XYZ0 button to set the Zero start
point.
 Next enter all the scan limits Z, step sizes, and scan velocity
 Next press the start scan.
 You'll be prompted to save the file which will automatically default to
an STL format and will be saved in a folder of your choice on the
drive
 Once the scan is finished you can now load the file into a 3D software
program like Vcarve Desktop or Pro, Aspire, or a CAD program like
Sketchup, Bob CAD or AutoCAD.
 The program must be a 3D-program in order for it to be shown
correctly
March 30, 2017 14 |
P a g e