Advertisement
Product Name:
SKU #:
Thank you for purchasing this Winsome House product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
CARTON CONTENTS:
Description
Fountain
Pump
Compatible Pumps for this fountain:
Pump Model No.
JR450/LED
JB450/LED
YH707/LED
YH-LV110T
Tools required for assembly: No tools required for assembly.
Assembly Instructions:
1. Unpack the contents of the box and check to make sure that all items are accounted for and in good
condition.
2. Select a flat, level surface for the assembly and final location of your fountain.
3. From the opening at the bottom of the fountain base, insert the water supply tube into the pump outlet.
Insert the LED connector into the pump connector, and twist to tighten. Place the pump upright in the basin
and draw the pump power cord out of the fountain back.
4. Add clean water to the fountain. The water level should be approximately 30mm lower than the edge of the
basin.
5. Connect the power cable to outlet. If installed properly, water flow in the fountain will begin shortly.
6. Please do not use the electrical plug in wet weather conditions. Please note: On first use, there may be air in
the pump. It may take several minutes until all the air escapes.
7. To eliminate the possibility of water damage around your fountain, check for leaks and excessive splashing
after the initial setup of your fountain. It is highly recommended that this fountain be placed in an area
where it cannot be damaged.
8. Do not leave your fountain running for extended periods of time when no one is present to observe the
performance.
9. Check the area around your fountain on a regular basis to ensure that there is no leakage.
Modern White Textured Pedestal Patio Fountain with LED Lights
WHF880
Quantity
1
1
Contact: sales@winsomehouse.com
Please save this manual for future reference.
Instruction Manual
Advertisement
Table of Contents
Related Manuals for LuxenHome WHF880
Summary of Contents for LuxenHome WHF880
- Page 1 Product Name: Modern White Textured Pedestal Patio Fountain with LED Lights SKU #: WHF880 Thank you for purchasing this Winsome House product. This product has been manufactured with the highest standards of safety and quality. PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
- Page 2 Modern White Textured Pedestal Patio Fountain with LED Lights SKU #: WHF880 10. Please refresh the fountain with water each week to ensure it in good condition. 11. Do not add any harmful chemicals to the water as it may alter the finish.
- Page 3 Instruction Manual Please save this manual for future reference. Product Name: Modern White Textured Pedestal Patio Fountain with LED Lights SKU #: WHF880 Pump Instructions: Special Warnings and Cautions: CAUTION: • The pump has been evaluated for use with water only.
- Page 4 Product Name: Modern White Textured Pedestal Patio Fountain with LED Lights SKU #: WHF880 WARNINGS: 1. To reduce the risk of electric shock, connect only to a properly grounded, grounding type receptacle. 2. To reduce the risk of electric shock, use only on portable self-contained fountains no larger than 5 feet in any dimension.
- Page 5 Product Name: Modern White Textured Pedestal Patio Fountain with LED Lights SKU #: WHF880 TIPS AND TROUBLESHOOTING: 1. Ensure that the pump’s flow control switch is set to maximum (+) before operating. Once the flow is established, the pump can be adjusted downward to the desired level.
Need help?
Do you have a question about the WHF880 and is the answer not in the manual?
Questions and answers