The Essentials - In Brief; Important Information - STIEBEL ELTRON AQ 35 E-2 Operation And Installation Instructions Manual

1. Operation Instruction

1.2 The essentials - in brief

A. Rotary control for temperature
adjustment
B. "Power" light
C. Shower accessories
The unit is optionally equipped
with an ELSD (Type AQ...E - 2
only) It is recommended to test the
ELSD one time per month.
How to test:
Switch on the electrical supply. Press
the Test button, the Trip light will go
on. Press the Reset button.
Warning!
If the Trip light activate after
reset or if the light activate during
shower, never try to fix it. Contact your
dealer for a check and repair.
6
Shower head must not be higher than the unit.
C
for the user and the qualified installer

1.3 Important information

The unit must not be put
under pressure. The outlet of
the unit is also used as a vent.
A periodical scale removal is essential
for the function of the shower head.
B
A
Warning!
If, during a shower , the water
valve is closed, (such as applying soap
to the body), then valve opened again,
high water temperature may occur, to
avoid risk of scalding, stay any from
the shower head discharge zone
momentarily.
Fig. 1
STIEBEL ELTRON