Advertisement
Figure 20
1. Knobs
2. Electrical-panel cover
3.
Assemble the cover to the plate and secure the
panel with the knobs
4.
At the outboard side of the control console, align
the holes in the right control-console cover with
the holes in the console
Figure 21
1. Control console panel
2. Flange-head capscrew
5.
Assemble the cover to the control console
(Figure
21) with the 5 flange-head capscrews
that you removed in
Console (page
3).
3. Electrical plate
4. Grommet
(Figure
20).
(Figure
21).
3. Control-console cover
(right)
Preparing the Control
7
Finishing the Kit Installation
No Parts Required
Connecting the Battery
1.
Rotate the battery-disconnect switch to the O
position
(Figure
g320789
1. Battery-disconnect switch
(O
position)
FF
2.
Close the hood and secure it with the 2 hood
latches.
Testing the Traction System
1.
Start the engine and disengage the parking
brake.
2.
Press the high—low range-speed switch to the L
g320588
(low range) position
11
22).
Figure 22
2. Battery-disconnect switch
(O
position)
N
(Figure
23)
N
g031667
Advertisement
