Advertisement
Figure 18
1. Tube (traction
manifold-port M7—right,
front traction motor)
2. Kit wire harness
2.
Align the kit wire harness though the clamp side
of the MOC-LOC fastener, and secure the clamp
around the harness
3.
At the top of the machine, secure the kit wire
harness to the platform wire harness with 2
cable ties
(Figure
3. MOC-LOC fastener
(Figure
18).
19)
g321582
1. Cable tie
2. Kit wire harness
6
g321701
Installing the
Electrical-Panel and
Control-Console Covers
No Parts Required
Procedure
1.
Align the grommets at the bottom of the
electrical-panel cover
in the floor panel.
2.
Align the threaded rods of the knobs attached
to the cover with the cinch nuts of the electrical
plate
(Figure
10
Figure 19
3. Platform wire harness
(Figure
20) with the 2 pins
20).
g321708
g321709
Advertisement
