Advertisement
Frame Kit
Greensmaster
Model No. 140-9347
Installation
Preparing the Machine
1.
Park the machine on a level surface.
2.
Engage the parking brake.
3.
Shut off the engine.
1. Frame
© 2021—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
1018 or Flex
Removing the Existing
Frame and Installing the
New Frame
To remove the existing frame and install the new
frame, refer to the instructions in the traction
unit Service Manual for removing and installing
components that connect to the frame, including the
drum drive, transmission, and cutting unit, among
other components. Refer to
(page 2)
to install the handle to the frame.
Figure 1
Greensmaster frame and the surrounding
components.
Figure 1
Register at www.Toro.com.
™
1018 Mower
Installation Instructions
for instructions to use loose parts in this kit
shows an overview of the fixed-head
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Form No. 3448-673 Rev A
g368081
*3448-673*
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Toro 140-9347
Summary of Contents for Toro 140-9347
- Page 1 Form No. 3448-673 Rev A Frame Kit Greensmaster ® 1018 or Flex ™ 1018 Mower Model No. 140-9347 Installation Instructions Installation Removing the Existing Frame and Installing the Preparing the Machine New Frame Park the machine on a level surface.
- Page 2 Installing the Handle Use 2 bolts (1/2 x 2-1/2 inches), 1 anti-rotation washer, and 1 existing flat washer to secure the Apply thread-locking compound (e.g., blue handle assembly to the frame (Figure Loctite ® ) to the threads of the bolts (1/2 x 2-1/2 inches) and frame (Figure g370533...
Need help?
Do you have a question about the 140-9347 and is the answer not in the manual?
Questions and answers