Transmitter Button Functions; Replacing Remote Control Batteries - Code Alarm CA 1150 Owner's Manual

Transmitter Button Functions

Replacing Remote Control Batteries

1-Way 4 Button Remote Control:
The batteries (model CR2016) inside each remote control should last approximately
1 year under normal use. When the batteries become weak you will notice the
remote control range (the distance from the vehicle the remote control will work)
deteriorate and the small LED on the remote control will dim. To replace the remote
control batteries:
1. Remove 3 screws and disassemble the halves of the remote control.
2. Remove the old batteries, observing the +/- symbols on the batteries and
replace with new CR2016 batteries.
3. Reassemble the halves of the remote control and install the 3 screws.
4. Test operation of the remote control.
6 2009 Audiovox Electronics Corporation. All rights reserved.