Transferring Recorded Images To A Smartphone Automatically; Auto Transfer - Panasonic Lumix DC-TZ200D Operating Instructions Manual

Transferring recorded images to a smartphone automatically

Wireless connectivity required:
The camera automatically transfers recorded images to a Bluetooth-connected
smartphone via Wi-Fi.
1
Make a Bluetooth connection to the smartphone
2
Select the camera's menu
→
• If a confirmation screen is displayed on the camera asking you to terminate the Wi-Fi
connection, select [Yes] to terminate it.
3
On the smartphone, select [YES] (Android devices) or [Wi-Fi Setup] (iOS
devices)
• The camera automatically makes a Wi-Fi connection.
– (iOS devices) Follow the on-screen message on the smartphone to change the connected
device on the Wi-Fi setup screen.
4
Check the send settings on the camera, and select [Set]
• To change the send setting, press [DISP.] button.
• The camera will enter a mode where it can automatically transfer images and [
displayed on the recording screen. (If [Auto Transfer] is not displayed on the recording screen,
images cannot be transferred automatically. Check the status of the Wi-Fi connections to the
smartphone.)
5
Take pictures on the camera
• Every time you take a picture, it is automatically sent to a specified device.
• While sending a file, [
If you set [Auto Transfer] to [ON] in advance, the Wi-Fi/Bluetooth connection will be
automatically established and Auto Transfer enabled the next time you turn on the camera and
start up "Image App" on your smartphone.
240
Bluetooth
[Setup] → [Bluetooth] → [Auto Transfer] → [ON]
] is displayed on the recording screen.
Controlling with a Smartphone
Wi-Fi
(→227)
(→248)
Wi-Fi/Bluetooth
] will be