I50Sx Faceplate And Keypad Replacement Instructions; I50Sx Faceplate And Keypad Replacement; Instructions - Motorola iDEN i50sx User Manual

i50sx Faceplate and Keypad Replacement Instructions

Battery Charging Status
The battery strength indicator icon found on your phone's display screen shows
the charge amount remaining in the battery.
Icon
3
Display
When Low
Using Battery
Phone
When
Low
Charging Battery
Batteries
A short, chirp-like sound indicates a low battery. This indicates that you have
approximately five minutes of talk time remaining.

i50sx Faceplate and Keypad Replacement

Instructions

The following steps and accompanying illustration details the procedure for
removing and replacing the changeable faceplate and keypad.
Note the following:
• Before replacing the faceplate, ensure that the audio seal and keypad are
present and undamaged.
• For security and operational reasons, power to the i50sx phone should be
off prior to performing the removal and replacement procedure.
• There is a protective plastic liner over the lens. Peel off prior to operation.
Removal and Replacement Procedure
Follow these instructions to ensure proper audio loudness from the speaker.
1
While holding the back of the phone, press the faceplate release button
(one time), located at the bottom of the radio.
2 In an upward motion, grasp the bottom end of the faceplate first, while
also detaching the upper part from the i50sx faceplate.
4 5
11% to 41% to
40% 70%
30% to 61% to
60% 90%
6
Fully
Charged
Fully
Charged
15