Motorola iDEN i50sx User Manual page 18

3 Remove the keypad from the phone.
4 To replace the faceplate and keypad, lay the keypad on the phone body
or place the keypad into the faceplate.
5
As shown in the illustration, attach the faceplate to the phone body, first
at the top and then to the bottom. Rotate faceplate towards bottom of the
phone until the lower snap is engaged. Snap engagement will be
verified by a click sound. After the lower snap is engaged, verify that
the upper snap is engaged by pressing the earpiece area.
6 Re-apply power to the phone by pressing the power button, located on
the top of the phone.
Phone Body
Faceplate Release Button
16
Audio seal
www.motorola.com/iden
Faceplate
Keypad