Table of Contents
Advertisement
4-2.Installation of this product
This product is installed. Refer to the "User's Guide" of the computer.
CAUTION
Do not pull the cable when disconnecting it.
When disconnecting the cable from the device, hold the cable connector/cable tag
and pull it straight out. Pulling the cable out by the cable portion or giving
mechanical stress to the connector could damage the cables and connectors to
result in an electrical shock hazard or a fire.
CAUTION
High temperature
Immediately after powering off the system, system components such as hard
disk may be very hot. Wait for the server to cool down completely before
adding/removing components.
Make sure to complete installation.
Firmly install all power cords, interface cables and/or boards. An incompletely
installed component may cause a contact failure, resulting in fire and/or smoke.
-
-
34
Advertisement
Table of Contents
