Sharp PN-L851H Operation Manual page 40

Menu Items
TIPS
• You might infringe on a copyright of the author which is
protected by copyright law when you display the images of
the computer screen and television/VCR simultaneously for
profit-making or to show the image to the public.
• When quad-screen display is selected, screen size cannot
be changed.
The screen size for quad-screen display is the same as
the screen size for single-screen display. The Dot by Dot
screen is displayed in NORMAL size.
• When quad-screen display is selected, the CONNECT
AUTO INPUT SELECT function and NO SIGNAL AUTO
INPUT SEL. function are disabled.
• When quad-screen display is selected, SCREEN menu and
AUDIO menu cannot be set.
• When quad-screen display is selected, the DISPLAY
COLOR PATTERN cannot be set.
• When quad-screen display is selected, the monitor will
not enter the input signal waiting mode even if POWER
MANAGEMENT is set to ON.
• When quad-screen display is selected, HDMI CEC LINK
does not operate.
• When quad-screen display is selected, the FREEZE, DP
(DisplayPort), HDMI, and OPTION buttons cannot be used.
• When quad-screen display is selected, the position 1
screen is output from the DisplayPort output terminal.
• Positions 2 to 4 do not support HDR signals.
• When quad-screen display is selected, the connected
computer cannot be operated by touch.
40
E
nSCHEDULE
You can set the time to switch the monitor on and off.
Set this function with SCHEDULE in the SETUP menu. (See
page 34.)
SCHEDULE
– –/– –/– – – –
(2) (3)
(1)
No. POWER DAY OF THE WEEK
– – – – – – – –
-
– – – – – – – –
-
– – – – – – – –
-
– – – – – – – –
-
– – – – – – – –
-
– – – – – – – –
-
– – – – – – – –
-
– – – – – – – –
-
1. Press the or button to select the SCHEDULE
number, and press the
2. Set the SCHEDULE. (See the description below.)
Press the or button to select items, and press the
button to change the setting.
3. Press the ENTER button.
SCHEDULE becomes effective.
(1)
●: SCHEDULE effective
-: SCHEDULE not effective
(2) POWER
ON: Switches the monitor on at the specified time.
OFF: Switches the monitor off at the specified time and puts
the monitor in standby mode.
(3) DAY OF THE WEEK
Specifies the day of the week to execute the SCHEDULE.
0: ONLY ONCE
Executes the SCHEDULE once on the specified day.
Specify the day of the week to execute the SCHEDULE.
1: EVERY WEEK
Executes the SCHEDULE on the specified day of the
week every week. Specify the day of the week to execute
the SCHEDULE.
Periodic setting such as "Monday through Friday" is also
possible.
2: EVERY DAY
Executes the SCHEDULE every day regardless of the day
of the week.
(4) TIME
Specifies the time to execute the SCHEDULE.
Set the time on a 12-hour basis. (Factory default)
(5) INPUT
Specifies the input mode at power-on. If you don't specify
this the input active at the last power-off will appear.
When START INPUT MODE is set to a value other than
LAST INPUT MODE, the input mode configured for START
INPUT MODE will be set.
D-SUB
– – – – –:– –:– – – –
(4) (5) (6)
TIME INPUT BRIGHT
– – – – – – – – – –
:
– – – – – – – – – –
:
– – – – – – – – – –
:
– – – – – – – – – –
:
– – – – – – – – – –
:
– – – – – – – – – –
:
– – – – – – – – – –
:
– – – – – – – – – –
:
OK:[ENTER] CANCEL:[RETURN]
button.
or