Sharp PN-L851H Operation Manual page 35

AUDIO SELECT
Selects the terminal used to input audio signals in each input mode.
AUDIO OPTION
SPEAKER SELECT
Selects the speaker to be used.
AUDIO OUTPUT
Sets the volume of sound output from the audio output terminal.
VARIABLE1 ........ You can adjust the volume from the speakers of this monitor and the audio output terminal simultaneously
by using VOLUME.
VARIABLE2 ........ You can adjust the volume from the audio output terminal by using VOLUME.
Sound will not be output from the speakers of this monitor.
FIXED................. Fixes the volume from the audio output terminal. Adjust the volume by using an external device.
AUDIO INPUT LEVEL
Selects the maximum audio input level of the audio input terminal.
MONAURAL AUDIO
Outputs audio signals as monaural.
TOUCH INPUT SELECT
Set the TOUCH PANEL terminal connected to the computer in each input mode.
When "-" is selected, the touch panel cannot be used.
START INPUT MODE
You can set the input mode that will be in effect when the power is turned on.
When this is set to LAST INPUT MODE, the input mode when the power was last turned off will appear.
* When NO SIGNAL AUTO INPUT SEL. is ON and there is no input signal in the set input mode, the input mode will change
to the input mode that has an input signal.
COMMUNICATION SETTING
MONITOR CONTROL SELECT (when APPLICATION is ENABLE)
RS-232C ............ Select to control this monitor by RS-232C.
LAN .................... Select to control this monitor by LAN.
APPLICATION .... Select to control from the application of APPLICATION mode.
BAUD RATE
Selects the communication speed used for RS-232C communication.
REMOTE No.
Sets the number of the remote control unit. (See page 41.)
Menu Items
35
E