Connecting Peripheral Equipment - Sharp PN-L851H Operation Manual

Connecting Peripheral Equipment

Caution
• Be sure to turn off the main power switch and disconnect
the plug from the power outlet before connecting/
disconnecting cables. Also, read the manual of the
equipment to be connected.
• Be careful not to confuse the input terminal with the output
terminal when connecting cables. Accidentally reversing
cables connected to the input and output terminals may
cause malfunctions and the other problems.
• Do not use any cable that has a damaged or deformed
terminal. Using such cables may cause malfunctions.
TIPS
• When using a touch panel with a computer connected to
the video input terminal on this monitor, connect the USB
cable to the computer. For details, see the Touch pen
Management Tool Operation Manual.
• Images may not be displayed properly depending on the
computer (video card) to be connected.
• Use the automatic screen adjustment when a computer
screen is displayed for the first time using D-SUB or
when the setting of the computer is changed. The screen
is adjusted automatically when SELF ADJUST in the
MONITOR menu is set to ON.
• If the audio output from the playback device is connected
directly to speakers or other devices, the video on the
monitor may appear delayed from the audio portion.
Audio should be played through this monitor by connecting
the playback device to the monitor's audio input, and
connecting the monitor's audio output to the speakers or
other devices.
• The audio input terminals used in each input mode are
factory-set as follows.
Input mode
DisplayPort
HDMI1
HDMI2
D-SUB
16
13 15
Audio input terminal
(Factory setting)
DisplayPort input terminal
HDMI1 input terminal
HDMI2 input terminal
Audio input terminal
8 7 6
1. HDMI1 input terminal
2. HDMI2 input terminal
• Use a commercially available HDMI cable (conforming to
the HDMI standard) that supports 4K.
• Select the audio input terminal to be used in AUDIO
SELECT of the SETUP menu.
When HDMI is selected, it is not necessary to connect an
audio cable to the audio input terminal.
3. DisplayPort input terminal
• Use a commercially available DisplayPort cable
(conforming to the DisplayPort standard) that supports
4K.
• Select the audio input terminal to be used in AUDIO
SELECT of the SETUP menu.
When DisplayPort is selected, it is not necessary to
connect an audio cable to the audio input terminal.
4. D-sub input terminal
5. Audio input terminal
• Use an audio cable without resistance.
• Set the audio input terminal to be used in each input
mode in AUDIO SELECT on the SETUP menu.
6. RS-232C input terminal
• You can control the monitor from a computer by
connecting a commercially available RS-232 straight
cable between these terminals and the computer.
9
10
11
12
9
14
4
3
1
2
5
13
E