BRAYER BR1101 Instruction Manual page 7

12 En
DRIP TRAY (1)
• A red pop-up indicator (3) in the grid (2) will show
when the tray (1) is full.
• Remove the grid (2) from the tray (1), remove the
tray (1) and pour out water, install the tray back to its
place, put the grid (2) on the tray (1).
• If necessary, wash the tray (1) and the grid (2) with
water and soft detergent, rinse and dry.
STORAGE
• Before taking the coffee maker away for long storage,
unplug it and let the unit cool down.
• Clean the coffee maker.
• Pack the coffee maker in the original package.
• Use and store the coffee maker at the temperature
above 0 °C.
• Keep the coffee maker in a dry cool place out of
reach of children and disabled persons.
TROUBLESHOOTING
Problem Cause Solution
The tray is full of
Please, clean the tray.
Water leaks from
water.
the bottom of the The coffee Please, apply to the service
coffee maker maker is
center for repairing the
coffee maker.
damaged.
https://tm.by
Интернет-магазин TM.by
There is ground
Water leaks from Clean the filter edges from
coffee on the
the filter holder.
ground coffee.
filter.
Clean the coffee maker
The coffee
maker was not
from mineral scale and
washed after wash it from the remaining
Ready coffee
descaling. descaling agent.
has unpleasant
Ground coffee Please, use fresh ground
taste.
was stored in a coffee. Keep unused
humid place for ground coffee in a hermetic
a long time. package in a dry cool place.
No voltage in the
Make sure that the mains
mains socket.
socket is properly operating.
The unit cannot
The power plug
Check whether the power
be switched on
is not completely
plug is completely inserted
inserted into the
into the socket.
socket.
The ready You can use steam to froth
indicator doesn't milk only after the indicator
glow white. starts glowing white.
The used cup
Steam doesn't
does not suit
froth milk
Use a tall and narrow cup.
for proper milk
frothing.
You used Use only whole milk with fat
skimmed milk. content 4-6%.
DELIVERY SET
Coffee maker — 1 pc.
1.
Measuring spoon — 1 pc.
2.
3. Manual — 1 pc.
TECHNICAL SPECIFICATIONS
• Power supply 220-240 V, ~ 50-60 Hz
• Rated input power: 1200 W
• Water tank capacity: 1,5 l
RECYCLING
For environment protection apply to the
specialized centers for further recycling after
the service life expiration of the unit.
The waste generated during the disposal of
the unit is subject to mandatory collection
and consequent disposal in the prescribed manner.
For further information about recycling of this product
apply to a local municipal administration, a disposal
service or to the shop where you purchased this
product.
The manufacturer reserves the right to change the
design, structure and specifications not affecting
general principles of the unit operation, without prior
notice.
The unit operating life is 3 years
En
The manufacturing date is specified in the serial
number.
In case of any malfunctions promptly apply to the
authorized service center.
13