Setting Up Speech Recognition; Starting Speech Recognition; Using Power Management - Motion Computing LE1700 User Manual

Setting up speech recognition

Before you can use speech recognition, you must configure the microphones and train the
system for the characteristics of your voice. The entire process takes about 10 minutes. You
should move to a quiet environment before starting this procedure.
To set up speech recognition
1. Open Motion Dashboard to the Audio panel (page 20).
2. Ensure that the speakers and microphone are set to appropriate levels.
3. Start Input Panel (page 22).
4. Tap the Tools and Options button (
5. Tap Next and follow the instructions in the setup program.
You can improve speech recognition by running additional speech training sessions. In
Control Panel, open Speech.

Starting speech recognition

After you have set up speech recognition, you can start it from Input Panel.
To start speech recognition
1. Start Input Panel (page 22).
2. Tap the Tools and Options button (
3. Select Dictation or Commands.
For more information about Dictation and Commands, see the Input Panel Help and the
Tablet PC Tutorials.

Using power management

The LE1700 includes a comprehensive suite of power management functions. By using
Motion Dashboard, you can control the following:
•
Power schemes
•
Alarms for low and critical battery
•
Power meter readings for up to two batteries
•
Advanced power settings
•
Hibernation settings
Power Schemes
Use the Power Schemes tab to select from a set of pre-defined power schemes that are
appropriate for various computing environments. You can also define your own scheme, or
save one to another name that makes more sense to you.
Chapter 3 Using your Tablet PC
), then tap Speech.
), then tap Speech.
29