Mitsubishi Electric MSZ-GS06NA - U1 Service Manual page 21

MSZ-GS24NA
MSY-GS24NA
Battery replacement indicator
Temperature buttons
* The backlight turns on when using the remote controller.
The backlight goes off if the remote controller is not used for a while.
NOTE: Last setting will be stored after the unit is turned OFF with the remote controller. Indoor unit receives the signal of the
remote controller with beeps.
INDOOR UNIT DISPLAY SECTION
Operation Indicator lamp
The operation indicator at the right side of the indoor unit indicates the operation state.
• The following indication applies regardless of shape of the indication.
Indication
The unit is operating to reach the set
temperature
The room temperature is approaching
the set temperature
Standby mode
(Only during multi system operation)
OBH874A
Signal transmitting section
Distance of signal :
About 20 ft. (6 m)
Beep(s) is (are) heard from
the indoor unit when the
signal is received.
Operation select button
ECONO COOL button
POWERFUL button
OFF/ON
(stop/operate) button
Operation state
SMART SET button
Room temperature
About 4°F(2°C) or more away
from set temperature
About 2 to 4°F(1 to 2°C) from
set temperature
—
21
FAN speed control button
WIDE VANE button
VANE control button
TIME, TIMER set buttons
forward button
backward button
TIME, WEEKLY TIMER
set buttons
RESET button
CLOCK button
Lid
Slide the lid down
to open the remote
controller. Slide it down
further to get to the
weekly timer buttons.
Lit
Blinking
Not lit