Supermicro SuperServer SYS-510T-WTR User Manual page 81

7. Press <Del> continuously during system boot to enter the BIOS Setup utility. From the top
of the toolbar, select Boot to enter the submenu. From the submenu list, select Boot Option
#1 as shown below. Then, set Boot Option #1 to [UEFI AP:UEFI: Built-in EFI Shell]. Press
<F4> to save the settings and exit the BIOS Setup utility.
8. When the UEFI Shell prompt appears, type fs# to change the device directory path. Go
to the directory that contains the BIOS package you extracted earlier from Step 6. Enter
flash.nsh BIOSname.### at the prompt to start the BIOS update process.
Chapter 7: Troubleshooting and Support
81