Display - Yamaha TMAX XP560 Manual

Automatic deactivation of the cruise
control system
The cruise control system is electroni-
cally controlled and linked with other
control systems. The cruise control
system will automatically deactivate
under the following conditions:
 The cruise control system is not
able to maintain the set cruising
speed (such as when going up a
steep hill).
 Wheel slip or wheel spin is detect-
ed. (If the traction control system
is on, traction control will engage.)
 Engine trouble, etc.
If the cruise control system is automat-
ically deactivated, the "
light will turn off and the "
tor light will flash for 4 seconds.
If the cruise control system was auto-
matically deactivated, please stop and
confirm that your vehicle is in good op-
erating condition before continuing on.
When traveling on roads with steep
grades, the cruise control system may
not be able to maintain the set cruising
speed.
 When going uphill, the actual trav-
eling speed may become lower
than the set cruising speed. If this
occurs, accelerate to the desired
traveling speed using the throttle.
 When going downhill, the actual
traveling speed may become
higher than the set cruising speed.
If this occurs, the setting switch
cannot be used to adjust the set
cruising speed. To reduce the
traveling speed, apply the brakes.
When the brakes are applied, the
cruise control system will deacti-
vate.
" indicator
" indica-
Instrument and control functions

Display

3
2
1
1. Coolant temperature meter
2. Left-side vehicle information display
3. Clock
4. Indicator icons
5. Tachometer
6. Right-side vehicle information display
7. Fuel meter
8. Drive mode display
9. Eco indicator "ECO"
10.Speedometer
TIP
 This model uses a thin-film-tran-
6-7
10 9 8
sistor liquid-crystal display (TFT
LCD) for good contrast and read-
ability in various lighting condi-
tions. However, due to the nature
EAU96096
4
5
6
7
6