Related Manuals for Fairland IPHCR13V
Summary of Contents for Fairland IPHCR13V
- Page 1 INSTALLATION AND USER MANUAL Thank you for choosing Fairland Full-inverter heat pump. This manual provides you necessary information for optimal use and maintenance, please read it carefully and keep it for subsequent use.
-
Page 3: Table Of Contents
CONTENT For users ………………………………………………………………………………. P.1-P.9 1. GENERAL INFORMATION ........................3 1.1. Components: ............................3 1.2. Operating conditions and range: ......................3 1.3. Benefits in different modes: ........................3 1.4.Cautions： ..............................4 2. OPERATIONS ............................... 6 2.1.Notice before use ............................. 6 2.2 Operation instructions.......................... - Page 4 Warning： a. Please read the following tips before installation, use and maintenance. b. Installation, removal and maintenance must be operated by a responsible person in accordance with the instructions. 1. Use Don’t put articles on the heat pump, do not block the air outlet. 2.Installation a.
- Page 5 4. Maintenance notice a. For repair or scrap, please contact an authorized service centre. b. Only qualified Service Technicians are permitted to carry any service work on heat pump.
-
Page 6: General Information
FOR INSTALLERS AND PROFESSIONALS 1. GENERAL INFORMATION 1.1. Components: After unpacking, please check that all the following components are complete. 1.2. Operating conditions and range: ITEMS RANGE -7℃～43℃ Operating range Air temp 18℃～40℃ heating Temp. setting cooling 12℃～30℃ 1.3. Benefits in different modes: The heat pump has three modes: Booster, Smart and Silence, which have different advantages under different conditions. -
Page 7: Cautions
FOR INSTALLERS AND PROFESSIONALS 1.4. Cautions： This heat pump has Power-off memory function. When the power is returned, the heat pump will restart automatically. 1.4.1. The heat pump can only be used to heat the pool water. It can NEVER be used to heat other flammable or turbid liquid. - Page 8 FOR INSTALLERS AND PROFESSIONALS leakage of electricity, please switch off the main power immediately and contact your local dealer. Do not try to repair the heat pump by yourself. 1.4.7. The main power switch should be out of the reach of Children. 1.4.8.
-
Page 9: Operations
FOR INSTALLERS AND PROFESSIONALS 2. OPERATIONS 2.1. Notice before use 2.1.1. Ensure no water is leaking on piping system before use, then unlock screen and press to power on heat pump. 2.2 Operation instructions SYMBOL DESIGNATION FUNCTION ON/OFF Power On/Off 1. - Page 10 FOR INSTALLERS AND PROFESSIONALS ② Screen unlock: a. Press for 3 seconds to unlock screen and it will be light up. b. After screen is unlocked, any buttons will be functional. Water inlet temperature Booster/ Smart Water outlet /Silence mode temperature Auto Heating...
-
Page 11: Daily Maintenance And Winterizing
FOR INSTALLERS AND PROFESSIONALS 4.Booster/Smart/Silence mode selection: ① Smart mode as default will be activated when heat pump is on, and screen shows ② Press ，then press to enter Booster mode, and screen shows to enter Silence mode, the screen shows . -
Page 12: Technical Specification
FOR INSTALLERS AND PROFESSIONALS 3. TECHNICAL SPECIFICATION IPHCR13V IPHCR17V IPHCR21V Model Operating air temperature (℃) -7~43 Performance Condition: Air 26°C, Water 26°C, Humidity 80% Booster (kw) 16.2 20.5 26.5 COP at Booster Heating capacity (kw) 13.5 17.2 22.0 14.6~7.5 15.1~7.0 14.6~6.8... -
Page 13: Transportation
FOR INSTALLERS AND PROFESSIONALS 1. TRANSPORTATION 1.1. When storing or moving the heat pump, the heat pump should be at the upright position. Otherwise the heat pump can be damaged and will not work. 1.2. When moving the heat pump, do not lift or hold the water union to avoid the titanium heat exchanger damage. -
Page 14: Installation Instruction
FOR INSTALLERS AND PROFESSIONALS 2.2.Installation instruction 2.2.1. Water pipes connection and distance sketch To avoid air recirculation, the heat pump should be installed in a place with good ventilation or should reserve sufficient space for installation and maintenance. Please refer to below: A distance at least 500 mm is required between the heat pump and the walls, shrubs, equipment, etc. - Page 15 FOR INSTALLERS AND PROFESSIONALS UNIT=MM IPHCR13V IPHCR17V IPHCR21V Above data is subject to modification without notice. 2.2.2.Heat pump installation The frame must be fixed by bolts to concrete foundation or brackets. The concrete foundation must be solid. The heat pump needs a water pump (Supplied by the user). The recommended pump specification-flux: refer to Technical Parameter, Max.
- Page 16 Breaker Earthing NOTE: Must be hard wired, no plug allowed. For the detailed wiring diagram, please refer to Appendix 1. 2.Options for protecting devices and cable specification MODEL IPHCR13V IPHCR17V IPHCR21V Rated Current A Breaker Rated Residual Action Current mA Fuse ）...
-
Page 17: Trial After Installation
FOR INSTALLERS AND PROFESSIONALS 2.3.Trial after installation Please check all the wirings carefully before turning on the heat pump. 2.3.1. Inspection before use Please check if the heat pump is well installed, and check the pipe connections in accordance to the pipe diagram. -
Page 18: Trouble Shooting For Common Faults
FOR INSTALLERS AND PROFESSIONALS 2.4.2 Winterizing In winter season when you don’t swim, please cut off power supply and drain water out of the heat pump. When using the heat pump under 2℃, make sure there is always water flow. Important: Unscrew the water union of inlet pipe to let the water flow out. -
Page 19: Failure Code
FOR INSTALLERS AND PROFESSIONALS 4. FAILURE CODE DISPLAY NOT FAILURE DESCRIPTION No water protection Power supply excesses operation range Excessive temp difference between inlet and outlet water (Insufficient water flow protection) Ambient temperature too high or too low protection Anti-freezing reminder DISPLAY FAILURE DESCRIPTION High pressure protection... -
Page 20: Appendix 1：Heating Priority Wiring Diagram (Optional)
FOR INSTALLERS AND PROFESSIONALS APPENDIX 1：HEATING PRIORITY WIRING DIAGRAM (OPTIONAL) -
Page 21: Appendix 2：Heating Priority Wiring Diagram(Optional)
FOR INSTALLERS AND PROFESSIONALS APPENDIX 2：HEATING PRIORITY WIRING DIAGRAM(OPTIONAL) -
Page 22: Appendix 3：Heating Priority Wiring Diagram(Optional)
FOR INSTALLERS AND PROFESSIONALS APPENDIX 3：HEATING PRIORITY WIRING DIAGRAM(OPTIONAL) - Page 23 FOR INSTALLERS AND PROFESSIONALS Parallel connection with filtration clock A: Water pump timer B: Water pump wiring of Heat Pump Note: The installer should connect A parallel with B (refer to the picture above). To start the water pump, condition A or B is connected. To stop the water pump, both A and B should be disconnected.
- Page 25 Version: C00IVr32...